3 Layer Desktop Refrigerated Cake Display Case 47.2''Length Rear Slide Door 220V

Description

3 Layer Desktop Refrigerated Cake Display Case 47.2''Length Rear Slide Door 220V
Parameters:
Name
Cake Display Cainet
Power
315W
volume
135L
Voltage
220V
Shelf Size
42*9Inch (107*23cm)
42*7.48Inch (107*19cm)
Refrigerating Fluid
R134a
Ambient Temperature
35.6℉-46.4℉
（2℃-8℃）
Refrigeration Size
47.2*19.1*30.7Inch (120*48.5*78cm)
Note:
The ambient temperature is measured at room temperature and humidity are 23℃ and 50% when the machine has been working for about 4 hours.Depending on the working environment, we only guaranteed that the ambient temperature within the temperature range and DO NOT guaranteed reached minimum temperature.
Products cannot be placed on the air inlet duct and the air outlet duct. Placing products will easily block the air duct. No air will cause the evaporator to freeze and block. The temperature of the cabinet is too high, which is higher than the normal temperature range displayed on our website.
The cooling of the machine is normal when the machine temperature is in the range of 2℃-8℃.
Features:
Attractive interior LED lighting.
Digital temperature controller and display.
Front facing glass, glass windows on both sides.
Heating wire defogging glass
Equipped with rear sliding door.
Precautions:
1. Please do not turn on the defogging switch frequently (turn it on when there is fog, and turn it off when there is no fog). Frequent turning on may cause the temperature to remain high.
2. Please be sure to clean the radiator once a month or so to improve the cooling speed.
3. Do not block the air inlet of the return air outlet in the cabinet and the cooling air outlet outside the cabinet.
4. The intelligent temperature control has been adjusted accurately before shipment, do not adjust it without authorization, please contact us if necessary.
5. When the machine is cooling, a small amount of fog will appear in the cabinet for a short time when the cabinet door is opened. This is a normal phenomenon, and it will disappear after closing the cabinet door for about a minute.
6. The defogging function is the electric heating defogging of the three-layer glass of the front glass, which basically does not fog. The side glass door and the rear door glass are double-layer insulating glass, and occasionally there will be a small amount of fog when the weather is humid. This is a normal phenomenon, and this phenomenon will disappear when the air conditioner is turned on or the air flow is accelerated.
Details:
Matters needing attention when using:
1. When handling, the box should be kept as straight as possible, the maximum inclination should not exceed 45 °C, and it should not be placed upside down or horizontally;
2. Placement of the freezer: It should be placed in an environment with smooth air, cool and dry, and no corrosive gas around it. Remember to be close to the heat source and avoid direct sunlight. The front and rear of the cabinet should be kept more than 10cm away from the wall. The cabinet is stable to avoid vibration or excessive noise;
3. The frozen storage time of food is limited and cannot be stored for a long time, otherwise the freshness and moisture will be lost. Food should be placed in the cabinet with a certain distance to facilitate smooth air and uniform temperature;
4. The freezer can be turned on after 5 minutes of installation and shutdown. Do not turn it on after it has been shut down. For the first use or after a period of shutdown, the empty cabinet should be run for about 2 hours, and then put in food;
5. Defrosting: When the frost layer is more than 5mm thick on the surface of the freezer evaporator, it will affect the cooling effect and must be defrosted in time. When defrosting, the power supply should be cut off. Open the door and use the ambient temperature to defrost; if you need to speed up the defrosting, you can put an appropriate amount of hot water into the box to defrost.
Notice: Never use sharp metal tools to remove the frost layer!
6. The fresh-keeping work surface should not be hit with hard force or cut with sharp objects, such as knives and forks, otherwise the work surface will be damaged.
7. If the ambient temperature is high, there may be dewdrops on the outside of the box. This is a normal phenomenon. Please dry it with a soft dry cloth in time.
8. In order to save electricity, the number of opening doors should be minimized and the opening time should be shortened.
9. Please clean the oil and dust on the condenser and fan regularly to ensure energy saving and the best cooling effect.
Appication:
Air patenting Cake Display cabinet application for store, supermarket, hotel, market, ect. It also can extend display cycle of vegetable, food, beverage, cooked food, candy, cake, cosmetics.
Item include:
Desktop refrigerated cake display cabinet*1*1
Item Number: 210160
Shipping & Handling  Detailsss
Default Shipping Cost or Free Shipping Information:
▲ Default shipping cost or free shipping service is only for the lower   48 United States by UPS Ground or USPS. Other areas or needs other   shipping ways, please contact us.
▲ Buyers from Guam, Puerto Rico, Virgin Islands, American Samoa,  Alaska,  Hawaii, PO Boxes, APO/FPO addresses or other  countries/areas, there WILL  be extra shipping costs, please contact us  for more detailed  information.
▲ Please make sure your address is valid for both UPS and USPS  services.  Any costs incurred because of incorrect or undeliverable  address should  be undertaken by buyer.
HandlingTime:
Shipping is usually made in 1-3 business days after payments cleared. Orders are   processed from Monday-Friday; Not on the weekends & public holidays.
Sales tax/Customs duties:
Any sales taxes or Customs duties are not included. If came out, they must   be undertaken by the buyer.
Damage In Shipping:
Email   or call us First! We will work with you to get the case resolved in the   fastest method.
Return / Refund
If you are not 100%   happy with your purchase, please contact Us. Please don't directly   opened a request or case without informing us, or else, we will do some   discounts on the warranty and other sales-services later on. Hope for   your understanding.
Returns & Exchanges
▲ All returns must  be  made within 30 days of delivery date. Items must be in new, unused   condition, with all original materials included with the shipment. A   partial refund may be applied for opened or damaged items, depending on   the condition.
▲ Items returned under the buyer’s remorse: The return shipping fee  must  be covered by the buyer; The original shipping cost will also be   deducted from the refund. 15% restocking fee of the items purchase  price  will be charged.
▲ Returns that are the result of our seller's error: Buyer will receive   a full refund of the item as well as shipping charges
▲ All returns require a RA (Return Authorization) number that will be   given by our seller. Please contact with us at first for more details.
Defective & Damaged Products
▲ If product was received damaged or not as described, please send us   some pictures or videos, so we could well understand your problem, then   solve them for you ASAP. Besides, it's much helpful for us to claim  with  UPS, remind our related department to pay much more attention to   packaging later on. Hope for your understanding.
▲ Replacement or refund of defective or damaged products can only be   returned in exchange for the exact same product, or else, the purchase   price will be refunded back to your original payment method.
▲ If an item is received damaged, customer service must be contacted   within 7 days of receiving your item. All returns require a RA (Return   Authorization) number as above.
Warranty & Feedback
▲
6   months' warranty for the machines, not for the consumables. We stand   behind our products all the item, so even if your warranty period has   expired, you can still seek for service or technical support from us   with low cost.
▲ Any   warranty shipping cost to us is responsible by buyer.
▲ Any shipping cost to buyer is responsible by the seller.
▲
We  committee  to the customer satisfaction and want to bring you the best  purchase  experience. If there is any problems, please contact u
s ASAP.  If not,  please leave us a positive feedback as it's very important for  us.  Thanks very much.
On Aug 9, 2024 at 04:23:57 PDT, seller added the following information: