CF2-CYMBAL CompactPCI IEEE 1394 Hostadapter

Description

CF2-CYMBAL • CompactPCI ® IEEE 1394 Hostadapter
CF2-CYMBAL
CompactPCI
IEEE 1394 High Performance Serial Bus (FireWire™) Host Adapter
400Mbps Open Host Controller Interface
Summary of Technical Features
Printed Circuit Board
3U Eurocard (100x160mm
2
), front panel 4HP (20.3mm)
Front Panel Elements
Three Molex receptacles, 6-leads with 12V power distribution, individually current protected by 1.5A resettable fuses
Dual-LED, indicating PHY power present and cable active status
IEEE 1394 Chipset
Texas Instruments OHCI Link Layer Controller 100, 200 und 400Mbps, IEEE 1394a-2000
Texas Instruments PHY 100, 200 und 400Mbps, IEEE 1394a-2000, Triple-Cable Transceiver/Arbiter, Cable Port Monitor, Cable Power Monitor, transceiver disabled when cable not active, short reset, switching regulator powers PHY from cable when board is switched off (1394 hub function maintained when CPCI system is powered down)
CompactPCI®
Bus
32-Bit, 33MHz (133MB/s), 3.3V or 5V interface, peripheral slot CPCI connector J1
Power Requirements
+5V ±5% 0.1A max.
+3.3V ±0.3V 0.3A max.
+12V ±5% 0.1A max. (whithout 1394 cable power charge)
+12V ±5% 1.6A max. (with 1394 cable power at max. load)
V
IO
+3.3V or +5V compliant, max. 0.1A
Thermal Conditions
Environmental Conditions
Operating temperature 0° ... 70°C (industrial temperature range available on request)
Storage temperature: -40°C ... +85°C, max. gradient 5°C/min
Humidity: 5% ... 95% relative humidity, non condensing
Altitude -300m ... +3000m
Shock 15g 0.33ms, 6g 6ms
Vibration 1g 5-2000Hz
Regulations
EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)
2002/95/EC (RoHS)
MTBF
0.3 x 10
6
h