DiY Performance Production Outlaw Engine, Approx 17hp & 7500 RPM's

Description

Exclusive
DiY Performance
Production Built High Performance Engines
Built in Oakboro NC by
Dover Power LLC
(41 years in the engine building business > Full Time)
This engine is a well thought out engine thats perfect for Hot Rod Mini Bikes, Light Drag Racing , Off Road, Also Great for Back Yard Race tracks or at your local commercial tracks where you have no concerns about rules.
The
Standard Production 17
engine design will produce approx 17hp and a safe Max RPM of 7500 / 212cc engine
>
70mm (2.755") Bore Size with Lite weight Hypertectic Flat Top Piston, Uses 1mm Wiseco Type Rings
>
55mm (2.163") Stroke Crankshaft
>
ARC Billet Aluminum Connecting Rod with Babbitt Bearings
>
Fully Machined / Ported Cylinder Head, 27/25mm Valve Size
>
22 lb Spring Set, split keepers & Alum Retainers (Automotive type)
>
Shaft Rocker System 1to1 ratio
>
Superman .265 Hi Torque Camshaft
>
Aluminum 3/16" Heavy Duty Push Rods with Steel Tips
>
Dover Power "Holey Moses" Outlaw 640 Carburetor (You can order it for Gas or Methanol)
>
Performance Cast Aluminum 3.1 lb Flywheel (We suggest a max7500 rpm's,don't be fooled about 10,000 rpm claims Dangerious
>
Performance Ignition Coil , Retard & Resistor Free (Better Acceleration)
>
Billet Aluminum Hi Flow Filter Adapter w/ choke hold & 4" Angled Filter & PreCleaner
>
Plumbed Valve Cover
>
Aero Dynamic Aluminum Top Plate w/ forced air flap to direct air directly to cooling fins, Fuel Pump & Throttle system as well
The
Plus Production 18
Engine is basically the same engine as spec'ed out above with a few things changed, listed below
>
Bore Size enlarged to 72mm (2.835")  Brings the engine up to 224cc
>
PVL Certified 3.9 lb Flywheel> Unlimited RPM's
>
Superman .275 Lift Cam & 26 lb springs
>
Additional Port work to refine the HP Output
>
This design will add approx 1.5hp and quite a bit more torque (Average RPM range 7500-8000 rpm's
As you can see this engine has the good parts included,, well designed and all parts match up together to get the best bang for your buck and give you most importantly Reliability... Although Racing engines do not usually have a warranty we do stand behind our work and will
ASSIST / HELP
with any premature failure you might have... Ofcourse proper maintence much be done...
>
Keep dirt out of engine via Filter
>
Keep Oil Changed (Using a good oil which we advise with the Engine Sheet that comes with engine)
>
Keep outside of engine clean so not to cause engine to run
HOT
Engine comes complete, break in time is done already. You have to add your own Header, chain Guard and motor mount if needed.. And MOST IMPORTANTLY OIL... Oil does not come in the engines due to shipping restrictions. If you have ANY issues contact us directly instead of through EBAY.. This will get you direct help in a timely manner.. Thanks