DMP iCOM Network Alarm Router & iCOM-E Encrypt. Network Alarm Router Fire

Description

DMP iCOM Network Alarm Router & iCOM-E Encrypt. Network Alarm Router
Description
-
The iCOM™ Network Alarm Router and iCOM-E™ Encrypted Network Alarm Router allow DMP Command Processor™ Panels to communicate over an Ethernet or a full-time Internet connection to a DMP SCS-1R Receiver. The iCOM/iCOM-E are compatible with XR500 panels. Operating as an interface between the panel and the network, the iCOM or iCOM-E installs inside the panel enclosure and communicates through a 462N Network Interface Card or connects directly to the panel using the nine-pin serial connector on J21.
These instructions apply to both the standard iCOM™ and the iCOM-E™. Please note the specific programming options for the iCOM-E™ version only and the specific installation steps for the iCOM/iCOM-E and XR500 panel.
iCOM-E™ Description
-
For High Security applications where the Advanced Encryption Standard (AES) Rijndael Encryption Algorithm is required or desired, use the iCOM-E™ Encrypted Network Alarm Router. The iCOM-E™ is NIST certified.
Note
: The iCOM-E is not compatible with the XR500N, XR500E, or XR2500F panels.
(B)