Edelbrock 35850 Pro-Flo 4 EFI Kit, Big Block Chevy, Rect Ports

Description

It fits the Big Block Chevy with rectangular port cylinder heads, The easy to use self-learning system that will continually improve engine performance as the vehicle is driven and compensates for altitude and weather changes, Has a fully sequential port fuel injection system that delivers a smoother idle, great throttle response, improved peak power, Comes ready to run right-out-of-the-box with pre-loaded calibrations, It is ready to run right-out-of-the-box with pre-loaded calibrations
Edelbrock 35850 Pro-Flo 4 EFI Kit, Big Block Chevy, Rect Ports
Sku # 32535850
Mfr. Part # 35850
Condition
New
Brand
Edelbrock
Sold
Each
Details
Info
When choosing to upgrade your engine to modern fuel injection, look no further than Edelbrock's Pro-Flo 4 EFI systems. Edelbrock has been delivering the best combination of dyno proven electronic fuel injection performance for over 40 years. Pro-Flo 4 is not just a replacement for your carburetor, it's a complete engineered system that provides the ultimate in performance, drivability and quality. These easy to use, self-learning EFI systems feature an all new ECU pre-loaded with 80 dyno-tuned calibrations that support popular engine configurations up to 800 hp. Combined with the enhanced E-Tuner 4 App's easy to use setup wizard; you get plug and play performance without the need of a laptop or costly dyno tuning sessions. Pro-Flo 4 EFI systems are the most complete systems available on the market, giving you what you need to upgrade to powerful and efficient fuel injection for your vehicle. Pro-Flo 4 EFI systems are the best value for your dollar!
Fits Big Block Chevy with Rectangular Port Cylinder Heads
Supports up to 625 HP
Easy to use self-learning system that will continually improve engine performance as the vehicle is driven and compensates for altitude and weather changes
Fully sequential port fuel injection system that delivers a smoother idle, great throttle response, improved peak power and the potential for improved fuel economy
Ready to run right-out-of-the-box with pre-loaded calibrations - No laptop or tuning experience required
Internal fuel pump driver, no extra relay or wiring required
Easily adjust your ignition curve specifically for your engine setup, eliminating the hassle, complexity and limitations of the standard distributor advance mechanism
All kits include a plug and play single connection distributor designed to work specifically with Pro-Flo 4. No complicated distributor conversions, rotor phasing, CDI box or added expense of purchasing a distributor.
(JPEG)
Charts
(JPG)
(PDF)
Specs
Sold in Quantity
Each
Finish
Natural
Injection Style
Multi-port
Intake Section Included
Complete
Metering Style
Speed density
Intake Material
Aluminum
Intake Finish
Natural
Injector Size
35 lbs./hr.
Gaskets Included
Yes
Intake Manifold Included
Yes
Throttle Body Included
Yes
Distributor Included
Yes
Wiring Harness Included
Yes
EGR
No
Fuel Pump Included
No
Injectors Included
Yes
Fuel Rails Included
Yes
Calibration Module Included
Yes
IAC Motor Included
Yes
ECM Included
Yes
Fuel Pressure Regulator Included
No
MAP Sensor Included
Yes
IAT Sensor Included
Yes
Venturi Quantity
4
Self Tuning
Yes
Venturi Diameter
44.45mm
Throttle Body Barrels
4-Barrel
Throttle Body Flange Type
4-Barrel Square Bore
Throttle Body Style
Multi-Port Injection (MPI)
Throttle Body Material
Aluminum
Throttle Body Finish
Natural
MFG. Part #
35850
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.