Exhaust With Muffler for: Subaru Robin EX17, EX13, EX21,EX27 & 6 HP SP170

Description

You must know this before you make your purchase!
-
There is no painting in this exhaust,
Rust can come out over time,
"solution" you
applies high heat paint.
-
The chrome of the Muffler will peel it in 5mins...
if you don't agree with this ...don't buy it!
-
This muffler is a little more Loud than the factory.
-
The muffler has a NPT thread,
it is not possible to put it until the end, you will have 1/4 of thread outside which is normal.
-
This exhaust will change color due to the high heat generated by the engine.
Type of material:
mild steel,
Uncoated Steel.
This been tested on
: Subaru Robin EX17, Subaru EX21, EX27,
EX13 & Robin Subaru 6 HP SP170.
(no tested on other engine)
Please (
see photos
for details)
1/4"
thick
flange, tig weld.
Good for: Mini bikes, go karts, generators...
multipurpose.
Engine not included.
Gasket not included
.
Finding the Correct Pipe Thread Size
National Pipe Threads (NPT)
Pipe sizes do refer to physical dimensions, but the plumbing industry standard for the sizes of pipe is not always as straight-forward as measuring the pipe.
Measuring the pipe will oftentimes mislead you into choosing the wrong pipe, so do take care.
The "pipe thread size" as shown in column 3 of the table below is measured and based on the inside of the pipe. But, to actually determine the size of a pipe, the outside diameter of each pipe or fitting must be measured and compared to the table for size identification. For example, a 3/4" NPT pipe thread has an outside diameter of 1.050 inches. Each thread size has a defined number of threads per inch (TPI). The 3/4" NPT pipe thread has 14 threads per inch. Both the TPI (threads per inch) and OD (outside diameter) of the thread are required for positive identification of thread size because several sizes have the same TPI.
*Free shipping USPS  2-5 business days. ON U.S.A.
*INTERNATIONAL CAN TAKE 30 DAYS!
We only ship to paypal confirmed address.
Florida residents pay 7% taxes.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Please check my other Header (on other audition)