FiTech 31003 Go Street EFI 400 HP System

Description

Comes with a handheld controller, Features a die cast construction with a beautiful finish, It has extreme self-learning for wide range super-fast dial in correction, The EZ-tach input, reads tach signal from Coil, HEI, MSD/CDI and many other brand ignitions, Pre-programmed with Bolt-N-Go technology for out of the box performance with no tuning required
FiTech 31003 Go Street EFI 400 HP System
Sku # 52131003
Mfr. Part # 31003
Condition
New
Brand
FiTech
Sold
Kit
Details
Info
FiTech has realized that not everyone needs the biggest, baddest, highest-flowing fuel injection system you can get your hands on. Some of us just want a little more throttle response, be able to squeeze out better mileage and to make this change as easy as possible.
The
FiTech Go Street EFI Series
is the answer you have been looking for when it comes to performance, ease of setup, and reliability. As ready-to-run as they come but still providing the best in performance and economy, the all new FiTech Go Street EFI Series allows you to toss out that old leaky carburetor and bring new life to your favorite hotrod in the garage. This kit is designed for a simple, yet effective conversion to modern fuel injection technology at an incredibly affordable price.
This kit is also supplied with the FiTech Fuel Delivery kit for a simple and effective fuel system install. Included is a 255 L/ph EFI fuel pump, 20 feet of high pressure EFI grade hose, a 100 micron pre-filter and a 30 micron post filter, and associated push lock style fittings to simplify your fuel injection conversion. This system is designed for engines making up to 600 HP.
Kit Includes:
Die Cast Throttle Body
Handheld Controller
Windshield Mount
FiTech flow matched 62-lb injectors
Built-in pressure regulator
2.5 BAR Internal MAP Sensor
Throttle Position Sensor
Idle Air Control
Coolant Temp Sensor
Wide band O2 Sensor
O2 Bung Kit
(PDF)
(PDF)
Features
Self Learning- Extreme self-learning for wide range super-fast dial in correction
Suitable for crate engines and mild performance engines
Pre-programmed with Bolt-N-Go technology for out of the box performance with no tuning required
EZ-tach input, reads tach signal from: Coil, HEI, MSD/CDI and many other brand ignitions (no timing control)
For non boosted engines- Normally aspirated applications only.
Wide Band 4.2
On board fuel pump driver
Annular discharge design
Hand Held tuning module for performance tuning
1 Fan Control and AC Input (Kicks up Idle)
FiTech flow matched 62-lb injectors
Attractive Cast Finish
E85 compatible (30% reduction in HP capacity of fuel system and EFI)
Application
This Part Fits
Chevrolet, Pontiac, Ford, Chrysler, Dodge, Plymouth, Etc. engines making 150 HP up to 400 HP with a 4-barrel intake manifold.
Replacement for any 4-barrel carburetors for engines with 150 HP up to 400 HP.
Use the same size air cleaner you would normally use for your 4-barrel carburetor.
Charts
(PDF)
Specs
Sold in Quantity
Kit
CFM
850 CFM
Carburetor Flange Type
4-Barrel Square Bore
Injection Style
Throttle Body
Intake Manifold Included
No
Throttle Body Included
Yes
Distributor Included
No
Wiring Harness Included
Yes
EGR
No
Fuel Pump Included
Yes
Injectors Included
Yes
Fuel Rails Included
No
Calibration Module Included
Yes
TPS Sensor Included
Yes
IAC Motor Included
Yes
ECM Included
Yes
Fuel Pressure Regulator Included
Yes
MAP Sensor Included
Yes
IAT Sensor Included
Yes
Venturi Quantity
4
Self Tuning
Yes
Injector Size
62 lbs./hr.
Venturi Diameter
44.45mm
Throttle Body Material
Cast Aluminum
Throttle Body Finish
Natural
MFG. Part #
31003
Metering Style
Speed Density and Speed Throttle
User Tunable
Yes
Use with Power Adder
No
GTIN Code
854549007026
Max Horsepower Rating
400
Reviews
I'm deciding if I would buy this again or not.
Rated
by Big Daddy Cox on May 10, 2020
Summary:
I'm using this on an older Dodge pickup, the in line pump seems to have issues right out of the box. However Fitech's customer service is sending me a new one. I am waiting to see how soon it comes and if it's any better.
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.