FiTech 35261 Go EFI 2X4 W/ Force Fuel Delivery System, Aluminum

Description

FiTech Go EFI 2x4 Dual-Quad 625 hp self-tuning fuel injection systems with Force Fuel provide steady fuel to keep your Sunday cruiser, classic, or race car running under the most extreme conditions.
Dual-quad EFI systems handle up to 625 hp and feature a four injectors on each throttle body. They have the ability to change air/fuel ratios and ignition timing on-the-fly. You have the power of a hand-held controller with a touch screen for easy setup and adjustments. Thanks to a multi-bolt pattern, the 2x4 system will bolt onto most intakes, including tunnel rams, cross rams, Edelbrock, Holley, and many factory-style intakes.
FiTechs all-new Force Fuel system makes the upgrade to FiTech EFI even easier! It mounts under the hood and is fed with the original mechanical or electric fuel pump
FiTech 35261 Go EFI 2X4 W/ Force Fuel Delivery System, Aluminum
Sku # 52135261
Mfr. Part # 35261
Condition
New
Brand
FiTech
Sold
Kit
Details
Info
FiTech Go EFI 2x4 Dual-Quad 625 hp self-tuning fuel injection systems with Force Fuel provide steady fuel to keep your Sunday cruiser, classic, or race car running under the most extreme conditions.
Dual-quad EFI systems handle up to 625 hp and feature a four injectors on each throttle body. They have the ability to change air/fuel ratios and ignition timing on-the-fly. You have the power of a hand-held controller with a touch screen for easy setup and adjustments. Thanks to a multi-bolt pattern, the 2x4 system will bolt onto most intakes, including tunnel rams, cross rams, Edelbrock, Holley, and many factory-style intakes.
FiTechs all-new Force Fuel system makes the upgrade to FiTech EFI even easier! It mounts under the hood and is fed with the original mechanical or electric fuel pump. The fuel pump then fills the reservoir with a half-gallon of fuel to submerge an internal electric fuel pump—to keep it cool for long life and no chance of fuel starvation. An internal regulator keeps the pressure at a consistent 58 psi. Force Fuel then supplies the EFI system with the required high pressure to run at peak performance.
FiTechs Go EFI 2x4 dual-quad 625 hp EFI system features:
Uses easy-to-replace, GM-type sensors and Bosch 4.2 wideband oxygen sensors
8GB of data-logging
Wiring harness for dual-quad installation
Wet Flow swirl spray annual discharge obtains complete atomization
Stainless steel polished linkages
Choice of three fuel inlet connections
Will work with CDI box, but not required to control timing
Adjustable fan control switch
Kit does not include linkage or fuel lines
Systems with mounted ECUs offer spark control without the need for an external spark box or special distributor
Designed for applications making at least 6 in. of vacuum at idle
Force Fuel system adds:
5 ft. of high-pressure fuel hose
Serviceable 10-micron fuel filter
AN fittings
Return line fitting bung
Liquid filled gauge
Dual function bracket for bottom or side mounting
Installation Tips
Includes FiTech Force Fuel sump system. This system has a 1/2 gallon sump with 340 lph electric pump and integrated regulator pre-set to 58 psi. It is designed to work with the vehicle's current mechanical or electric fuel pump.
This item is being shipped to you directly from the manufacturer and is subject to an increased handling time. Delivery estimates that include the handling time are displayed on the "Shipping and Payments" tab.
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.