Interlogix UTC Fire & 515PS1 Video Surveillance Internal Power Supply for 515R1

Description

The 515PS1 Internal Rack Power Supply is designed to provide power to a 517R1 Card Cage Rack. The unit provides a single 13.5 VDC output operating at 6 amps. The power supply accepts an AC input voltage from 100 to 240 VAC, 60/50 Hz. A second power supply can be installed in the 515R1 Rack to provide redundancy.
A fiber-fail alarm is built into the 515PS1 power supply and is functional when the card cage rack is populated with receiver cards. The alarm activates when the optical signal input to any receiver card is lost. The alarm activates a buzzer built into the unit, illuminates a front panel LED, and relay contacts with connections on the back panel. The relay output can be connected to a remote device such as a lamp or buzzer, relay contacts are normally open (NO) dry contacts.
The 515PS1 front panel contains DC power and Alarm LED indicators as well a MUTE switch. The MUTE switch is used to disable the fiber-fail alarm.
The 515PS1 Internal Rack Power Supply is supplied with the 515R1 Card Cage Rack. If power redundancy is required, a second 515PS1 can be installed in the card cage rack. If the primary unit fails, switchover to the redundant power supply is automatic.
Features:
110 to 240 VAC, 60/50 Hz input
13.5 VDC output at 6 amps (Power Factor 48)
Supplied with 515R1 Card Cage Rack
Can be provided as redundant supply with automatic switchover
Fiber fail and power fail alarms
Front panel indicator and MUTE switch
Dry contact or 14 VDC alarm output
AC power cord supplied
Technical Specifications:
Input Voltage: 100 to 240 VAC, 60/50 Hz
Input Current: 0.99 A @ 115 VAC; 0.49 A @ 230 VAC
Power Consumption: 113 VA @ 115 VAC
Power Dissipation: 28 W @ 115 VAC
Output Voltage: 13.5 VDC
Output Current: 6 A
Power Factor: 48
Fuse Rating: 2.0 A, 250 V, slow-blow
Fuse Size: 5 x 20 mm, located in pull-out tray on back panel
Power Input: Recessed IEC 320 3-pin male (cable supplied)
Alarm Output: 5-pin detachable screw terminal
Length: 9.9 (251 mm)
Width: 2.0 (51 mm)
Height: 5.25 (133 mm)
Weight: 1.9 lbs (0.87 kg)
Construction: Aluminum
Finish: Black semigloss paint
Mounting: Two captive screws
Operating Temperature: -40 to 167 F (-40 to 75 C)
Maximum Humidity: 95% relative, noncondensing