KRC-4930BLK, #10AN LONG INLINE FUEL FILTER W/LONG STAINLESS ELEMENT, BLK ANODIZE

Description

ORIGINAL KRC LONG STAINLESS FUEL FILTER
FOR 10 AN (LONG STAINLESS ELEMENT INSTALLED)
KRC-4930
Bring aircraft technology to your race car!
Our stainless steel filters can be used up to 500PSI.
Filter is approved by the FAA and STC for model 60 through 90 series Beechcraft King Airplane’s long range fuel systems.
This filter is widely used in many racing series such as Lucas Oil Late Models, IMCA, Wissota, UMP, USMTS, off road racing and many NASCAR series.
KRC proudly offers our patented In-Line, hard anodized fuel filters. With today’s fuel filter system being a vital part of your engines performance, our fuel filters will get the job done! These patented stainless steel filters are used at 60 PSI for the fuel injected GM-LS1 engines and work the best for alcohol applications.
The micron on KRC's Stainless Fuel Filter is a 100 absolute. This is NOT a nominal rating like most filters. This is an Aircraft
Rating and is extremely precise. Our Stainless Filters keep the water out of gas and also work great for alcohol. KRC's Stainless Filters will stand the test of time and are truly "cleanable" unlike many pleated paper filters.
Paper filters are less expensive, don't last as long, and do not handle as well.
Our Stainless Filters flow approximately 5 gallons per minute at 12 PSI with 8 AN fittings; well over 350 gallons per hours with a 10 AN or 12 AN. This filter will stand pressure of 500 PSI. These filters are great for any fuel injection system which will run about 65 PSI. Filters are available in RED, BLUE, or BLACK.
We manufacture more sizes of fittings and combinations than anyone in our field.
PLEASE CHECK OUT OUR STORE FOR OUR ENTIRE LINE OF FUEL FILTERS!