MICRO-CURV CURVED CIRCULAR FONT FIXTURE FOR NEW HERMES WITH BOTH FONT DISKS ! !

Description

For sale is a brass and aluminum circular engraving fixture for new Hermes engraving machines. This fixture will also fit other engraving machines as long as you have a way to attach it to your font tray. This unit comes complete with BOTH alphanumeric template wheels(c
lockwise and counterclockwise
),hex keys, fine point sharpie and the operating instructions. This unit is used to engrave characters along a curve or a complete circle around an object.
WHY WAIT FOR A 30 YEAR OLD UNIT TO SURFACE ON EBAY
WITH NO PARTS AVAILABILITY ??  MOST OF THESE ARE TRASHED AND WORN OUT FROM DECADES OF USE. ITS ALSO NEXT TO IMPOSSIBLE TO FIND OTHER DISKS OR PARTS.
WE WILL ALWAYS MANUFACTURE AND CARRY PARTS FOR OUR UNITS !
WE ALSO HAVE THESE DISKS IN UPPER AND LOWER CASE SCRIPT !
(NON-CONNECTING)
WE ALSO CARRY A DISK SET WITH LOWER CASE BLOCK !
WE ALSO A CARRY SUB-MICRO DISK FOR DOING MICRO-MARKING ON SMALL PARTS !
WE ALSO STOCK PARTS FOR THESE ITEMS THAT ARE PACKAGED FOR IMMEDIATE DELIVERY. ALL OF THIS IS BRAND NEW VIRGIN BRASS THAT HAS NEVER BEEN TRACED WITH A STYLUS !
As you can see in the photographs the unit fits real nicely on the small GM model machine. The fixture is mounted on top of the copy stops using the included hardware. Please note that like the last picture when this unit is used on one of the larger machines it must be mounted directly to your copy slide holding tray. This will give the unit the needed clearance to allow your stylus arm to swing over the top of the unit without striking it. This will require that you drill two small holes in the aluminum or stainless steel tray to mount the unit.
You then write your phrase(with the included marker) on the brass disk which serves as a guide to help you during the engraving process. This fixture is very easy to use and is a nice item to have when engraving personal items like knives, jewelry, tools, etc. When you are finished using the fixture you wipe the marker off the disk with lacquer thinner,
acetone, nail polish remover etc.
LETTER HEIGHT = .291"
LETTER CIRCLE DIAMETER(outside edge to outside edge) = 3.200"
We also have an optional sub micro circular disk that fits this fixture that will create an even smaller circle of text. The diameter of the circle of text on the sub- micro disk is 2 3/8" or 2.375". At 8:1 reduction this optional disk can create a circle of text that is only .290" in diameter or 7.36 mm.
If you pay by noon I will mail this the same day for faster service. I use United States Postal Service priority mail for fast transit times.
PLEASE NOTE THAT THE HARDWARE KIT THAT IS SUPPLIED HAS FINE THREAD METRIC HARDWARE (5MM .8 PITCH). THIS FITS 99% OF THE MACHINES IN CIRCULATION. HOWEVER THERE ARE A FEW MACHINES OUT THERE THAT USE A (SAE) #10-24 UNC AMERICAN PITCH THREAD ON THE COPY STOPS. IF THIS IS YOU PLEASE REQUEST THE 10-24 HARDWARE KIT WITH YOUR PLATE OR THE METRIC VERSION WILL BE INCLUDED BY DEFAULT.
IF YOU ARE UNSURE OF WHICH THREAD YOU HAVE YOU WILL HAVE TO SUPPLY YOUR OWN HARDWARE. Knife is not part of the sale. For clarity the sale is for one unit even though a couple of the photographs show many of the units that we stock ready for sale.
Thank you for looking