Mini 4” Inch Spun Aluminum Wheels Go Kart Wagon Scooter Custom Project SET OF 2

Description

This listing is for a
SET OF 2
spun aluminum 4” wheels (4 halves, which makes TWO COMPLETE WHEELS). These are great wheels for any type of custom project, small go kart, wagon, work cart, or scooter type vehicle. They are finished in a very tough, silver anodized type coating. I have included pictures of these wheels with an 8” tire and a live axle hub installed to show how they look with a tire. THE TIRE, FASTENERS, OR HUB DO NOT COME WITH THE WHEELS! You can use either 1/4” or 6mm bolts, washers, and nuts to attach wheel halves together.
Each wheel half weighs 4 1/4 ounces or 122 grams, so two halves (one wheel) weighs approximately 8 1/2 ounces, or 244 grams (weight does not include fasteners). I'm sure there may be slight differences in each wheel, but certainly not enough to be concerned about.
This listing is for the the aluminum wheels only, no tires, fasteners or hubs! These can be used for almost any type of custom project. They are very well built, very strong and great quality. Thank you for looking and please contact me with any questions or concerns. I have had numerous requests asking for a set of four, so I created another listing that includes four wheels. Here is the listing for the set of 4...
https://www.ebay.com/itm/193630460815
For those of you wondering which tire and inner tube to use, here is my opinion. I use these wheels with two different types of tires. Possibly any rubber tire with the same sizes I mention here (in theory) should be able to be used. One is an 8” slick tire by Cheng Shin Tire. Size is 8x3.00-4 and model is C-190-3. The other is a 10” street/off-road combination tire by Kenda. Size is 3.00-4. Model is K671F-003. Either one of those tires are outstanding and very durable, along with being extremely good looking.
Any off the shelf 10” or 8” tire inner tube with 90 degree valve stem for hand trucks is perfect. The size on the tubes I use are 3.00-4 for the 10” Kenda and 2.50/3-4 for the 8” Cheng Shin.
I also found a hub that works with these wheels. It is available here on eBay from seller ombwarehouse. https://www.ebay.com/itm/Front-Wheel-Hub-5-8-Id-Bearing-Hardware-Go-Kart-Mini-Bike-Drift-Trike-Parts/174543129828?hash=item28a394cce4:g:k4gAAOSwxAFfyAyL