-40%
National Instruments SCB-68 Pin Noise Rejecting Shielded I/O Connector Block
$ 114.28
- Description
- Size Guide
Description
National Instruments SCB-68 Pin Noise Rejectinng Shielded I/O Connector BlockComes with what you see in the pictures. If you don't see it, you probably wont get it.
Specifications are from National Instruments and may vary slightly due to upgrades, options, or revisions this unit may or may not have.
These units are used.
The Unit's Serial Number Tag Reads:
Model Number:
SCB-68
Part Number:
182469-01B
Revision:
B4
Serial Number:
BA4C6B
CE Marked:
Yes
Key Features:
Shielded I/O connector block for use with 68-pin X, M, E, B, S, and R series DAQ devices
Screw terminals for easy I/O connections or for use with CA-1000
2 general-purpose breadboard areas
Onboard cold-junction compensation sensor for low-cost thermocouple measurements
General Specifications:
Number of Screw Terminals:
68, all I/O signals are available at screw terminals
Temperature Sensor:
Accuracy:
±1.0°C over a 0 to 110°C range
Output:
10 mV/°C
Power Requirement Specifications:
Power Consumption at +5 VDC, ±5%:
Typical:
1 mA with no signal conditioning installed
Maximum:
800 mA from host computer
Physical Specifications:
Box Dimensions:
18.1 cm x 15.2 cm x 4.5 cm (7.1" x 6.0" x 1.8")
Weight:
828 g (1 lb 13 oz)
I/O Connector:
One 68-pin male SCSI connector
Screw Terminals:
68
Wire Gauge:
14-30 AWG
Torque:
0.5-0.6 Nm (4.43-5.31 lb.in.)
Maximum Working Voltage Specifications:
Channel-to-Earth:
30 Vrms / 42 Vpk / 60 VDC
Channel-to-Channel:
30 Vrms / 42 Vpk / 60 VDC
Environmental Specifications:
Operating Temperature:
0 to 70°C
Storage Temperature:
-20 to 70°C
Relative Humidity:
5 to 90%, non-condensing
Maximum Altitude:
2,000 m
Pollution Degree (Indoor Use Only):
2
For Domestic Customers: Packaging, handling, and order processing included in shipping in all domestic shipments as quoted by the shipping calculator. For International Customers there is a .00 minimum for packaging, handling, and order processing. International shipping to be determined by destination.
Prior to shipment I will need to know the following information (filled out on a form that I will send you) for International Customers or Packages/Freight being Forwarded internationally. International customers may also be subject to a freight forwarder form if applicable.:
(1) Are you the end-user of this item?
(2) If you are not the ultimate end-user of the item, please state the ultimate end user's name.
(3) What is the ultimate country destination?
09/25/14