NEJE Master 2s Plus 30W CNC router Laser Engraving Machine Laser engraver Cutter

Description

Product Description
NEJE Master 2 Plu
s 30W Laser Engraving Machine Laser Cutter 255 x 420 mm
The new upgrade:
2s seriesmotherboard will update the GRBL 1.1f of ATMEL chip to brand new GD32 MCU.Which has improved 50% performance compare with STM32 chip.
l  It supports more than 10 different function modules, the NEJE modulehas excellent optical design and reliable work performance, which is the bestand the most guaranteed service currently. NEJE series module provides 2 yearsfree warranty.
l  Specialized Motherboard with GD32 MCU
l  It could preprocess 32 instructions, support baud rate as high as 2,000,000,compared to STM32 desktop laser engravers, which only has 921,600, morepowerful!
l  Engraving speed could be as high as 42,000 millimeters/Min. ( If donot consider the laser carving result, the velocity of movement could be ashigh as 1200millimeters/Sec. ); compared to stm32 desktop laser engravers,which only has 3000 millimeters/Min, more powerful!
l  The Most Advanced 32Bits Laser Engraver Firmware NEJE laser masterfirmware, smarter, faster, higher precision and easier to use. NEJE alsoprovides firmware upgrade services
l  Laser power range could be S0 - S1000, NEJE Laser Master couldcontrol laser beam more accurately, could even use the high power laser unit to"draw" a picture on paper, to match with NEJE series module canachieve the more accurate effect.
l  Active Position Protection
There is aG-sensor on the motherboard, if the machine detects unauthorized movement, thelaser beam will stop.
l  Laser Beam Safety Guard
If your computersystem halted or a USB cable disconnected, led to that the laser engraver stopsmoving, the laser beam will stop, to prevent fire.
l  Exposure Duration Detection and Limitation
If laserengraver is under control, but users forget to operate and keep the laser beamworking, extra safety will cut off in case the motor stopped moving, to preventfire.
l  NEJE software ( free software ) supports windows 7, 8, 10. Mac OS.NEJE APP including android, iOS macOS, NEJE team develops it which is forbeginner, it can provide high precision carving and CNC creation’s software,the operating procedures are automatic and simple, safe use. Especially thecurrent engraving software, NEJE team keeps upgrade and optimization, alsoprovides free upgrade services, you can get free upgrade services
l  free software, supports Windows XP, 7, 8, 10.
l  Laser GRBL ( free software ) supports Windows XP, 7, 8, 10. LaserGRBL is the most popular carving software in the world, could import differentformat images, you could editing in PhotoShop, Inkscape, CAD, etc. and thenconnect to the engraver via laser Laser GRBL for engraving and cutting.
l  LightBurn supports Windows,Mac OS, and Linux. It's the most popular paid carving software in the world,very easy to use.
l  NEJE module supports PWM control and temperature sensing, the modulecan adjust the focus by up and down, it also supports zoom module’s and focusesmodule’s installing.
l  Aluminum profile frame + structured cabling, solid structure, smoothoperation, attractive appearance, NEJE structure is different from otheracrylic main structure, NEJE machine is using high-strength composite  also uses CNC art craft, to make sure pulley and aluminum material withoutany gap. Besides, it won’t deformation for a long time, which means it isrobust and reliable.
Note(
Please pay attention
):
1. Please wear laser goggles during usage and avoid touching the laser directly with your eyes and skin!
2. Do not engrave mirror objects，Pay attention to fire，Pay attention to pets when working！
3. Smoke will be generated when burned, please pay attention to smoke exhaust indoors.
4. The warranty period of laser module is 6 months . If you have any quality problem, please feel free to ask our customer service for a help.
5. If your laser module has any problem, please DO NOT dismantle it without our permission. It will destroy the laser module.
6.  If you have any quality problem about the machine, please feel free to contact us. Many operative problem can be solved according to your video and problem description. Thank you in advance.
Features:
1. Larger area, 255 x 420 mm engraving and cutting area
2. 30W power module, optical power output 7.5W, focal point 0.01mm, support engraving and cutting.
3. Professional, support the latest grbl 1.1f firmware, support laserGRBL, and lightburn software.
4. The most simple and portable engraving experience: Support NEJE series software, including NEJE android APP, NEJE windows software(
win 7 / win 8.1/win10 above(Windows 7 Need to install the .net 4.8 software environment, Does not support windows XP
), NEJE mac software, NEJE wireless APP for iOS, ipadOS, macOS. NEJE Scanner APP.
5. Safety design, the laser module comes with a protective panel design to block more than 90% of the leaking light; built-in MEMS Roll protection.
6. Quiet use, intelligent drive, can automatically adjust the fan speed according to the laser temperature.
7. Two ways to adjust the focus, you can directly adjust the focus, you can also adjust the focus to a fixed position, use a fixed thickness board to adjust the focus, which can simultaneously take into account the use of engraving and cutting.
8. Support NEJE 4pin interface series modules, including 3500mw, 7W, 20W, 30W, 40W, etc.
9. The product has passed the quality control of NEJE factory and has a free 2-year warranty!
30W General Specification:
Model：NEJE Module 30W
Heatsink Material：Aircraft Aluminum + Brass Shell
Luminous Color：Blue
Section Size：40mm x 40mm
Cooling Mode：Temperature sensor intelligent control + 10000 rpm 40mm cooling fan
Dimension：60 * 40 * 40mm
Adapter Plug：5.5 2.1 port
Can Engrave：MDF/Balsa/Paper/Wood/Fabric/Plastic/Leather/Plywood/Foam Paper/Anodized Aluminum
Can Not Engrave：Metal/Glass/Stone/Ceramics/PCB/Stainless Steel/Reflective Material/ Transparent Material
Technical Parameters：
Module Input：20-30W
Optical power output：7.5W (7500mW)
Wavelength：445-450nm
Beam Shape：Dot (Focusable)
Working Voltage：DC 12V
TTL&PWM Modulation：YES, Compatible with Both TTL & PWM Modulation
Input Voltage：DC12V 3A
PWM/TTL Input：DC3.3V-12V
Input Interface：PH2.0-4Pin (+,-, PWM/TTL, Temperature), 3Pin (+,-, PWM/TTL) , 2Pin+2Pin (+,-) + (PWM/TTL,-)
NOTE：Temperature interface can be disconnected，NEJE provides text instructions for temperature acquisition on wiki.
Drive Mode：External ACC
Safe temperature range：<60 ℃
Module weight：202g ( The lighter the weight, the smaller the move inertia, the better the performance )
Life Time：10000-20,000 hours
Package included:
1 x Plus Engraving Machine
1 x 30W Engraving Module
1 x 12V3A Power Supply(US)
1 x European standard adapter
1 x Red glasses
1 x wooden board
(Including Data cable 1, wooden board 1, paper 5, pen 1, brush 1, focusing film 1, angle iron 4, aluminum oxide film 1, cable tie 3, nut 5, large hexagon wrench 1, small hexagon wrench 1, Open wrench 1))
About Us
Payment
Shipping
Returns
Contact Us
1. We will provide the best service and reliable products for every customer, however, accident may happen sometimes,We believe good cummunication can solve every problem happily, so pls contact us to solve any issue before leaving a negative feedback.
2. We will reply you ASAP. If you don't get response within 1-2 business days, pls check your eBay email or My Messages in case your email provider has an overly-aggressive spam filter blocking eBay or my e-mails. Please add us in your contact and email us again.
Working days: Monday - Friday
1:We accept payment via paypal ONLY.
2. Payment must be made within 5 days after your bidding. (Non-payment may result in a UPI (Unpaid Item) being put on your account.)
Shipping Method                                                            Tracking Number                              Delivery Time
Standard shipping from China                                                 YES                                             7-19   Business Days
Economy shipping from China                                                  No                                             11-25 Business Days
Attention: No shipping on Saturday Sunday or Public Holidays & No responsibility for any customs duty.
(1).If there's any problem, please do not hesitate to contact us by eBay message, we will reply you within 1 business day. (not include Public holiday)
(2).All returns - defective or otherwise - have to be preauthorized. Please contact us to get an authorization and returning address before sending the item back.If an item is returned because of an undeliverable shipping address, buyer agrees to pay the cost for re-shipment.
(3).Please note that If the return/replacement is not a result of our mistake (not defective or wrong item), the buyer is responsible for return shipping fee.
As we are honest seller,we live on feedback ,so your positive feedback and 5-star DSRs means a lot to us.
We would very much appreciate it if you would leave us a 5-star positive feedback
About Us
1. We will provide the best service and reliable products for every customer, however, accident may happen sometimes,We believe good cummunication can solve every problem happily, so pls contact us to solve any issue before leaving a negative feedback.
2. We will reply you ASAP. If you don't get response within 1-2 business days, pls check your eBay email or My Messages in case your email provider has an overly-aggressive spam filter blocking eBay or my e-mails. Please add us in your contact and email us again.
Working days: Monday - Friday
Payment
1:We accept payment via paypal ONLY.
2. Payment must be made within 5 days after your bidding. (Non-payment may result in a UPI (Unpaid Item) being put on your account.)
Shipping
Shipping Method                                                            Tracking Number                              Delivery Time
Standard shipping from China                                                 YES                                             7-19   Business Days
Economy shipping from China                                                  No                                             11-25 Business Days
Attention: No shipping on Saturday Sunday or Public Holidays & No responsibility for any customs duty.
Returns
(1).If there's any problem, please do not hesitate to contact us by eBay message, we will reply you within 1 business day. (not include Public holiday)
(2).All returns - defective or otherwise - have to be preauthorized. Please contact us to get an authorization and returning address before sending the item back.If an item is returned because of an undeliverable shipping address, buyer agrees to pay the cost for re-shipment.
(3).Please note that If the return/replacement is not a result of our mistake (not defective or wrong item), the buyer is responsible for return shipping fee.
Contact Us
As we are honest seller,we live on feedback ,so your positive feedback and 5-star DSRs means a lot to us.
We would very much appreciate it if you would leave us a 5-star positive feedback
You may also like
NEJE 7W 450nm laser module head kits for CNC laser engraving carving machine hot
76.99 USD
Free shipping
NEJE MASTER 2S PLUS 40W laser engraving cutting machine engraver CNC ROUTER DIY
549.99 USD
Free shipping
3500MW Laser Module / head kits for NEJE CNC laser engraving machine &PWM tester
59.99 USD
Free shipping
TTL/PWM 3500MW Laser Module engraving head for NEJE CNC laser engraving machine
56.99 USD
Free shipping
20W 450nm laser module head KITS for laser engraving machine w/ PWM test board
110.99 USD
Free shipping
powered by