OBP 2 Ltr Alloy Fuel Swirl Pot 280mm (H) x 100mm (Dia) Bulkhead Mount (OBPA024)

Description

Bulkhead Mount Fuel Swirl Pot Bent Top Tube
Dimensions
• 2 Litre: 100mm Dia x 280mm
Push-on Fittings:
• Inlet Pipes 2x10mm Inlet Pipes,
• 1x10mm Top Outlet Pipe(Breather)
• 1x1/2inch bottom outlet pipe
This Alloy Fuel Swirl Pot is designed to meet the requirements of the serious motorsports enthusiast who is using a fuel injected car for competition or fast road use.
Benefits of a Swirl Pot:
• Reduces injection pump failure
• Controls a supply of constant fuel
• Will not starve the engine of fuel whilst hard cornering.
These Swirl Pots are manufactured in our own factory based in UK to a very Hi-Standard.
Bulkhead Mount Fuel Swirl Pot Bent Top Tube Dimensions • 2 Litre: 100mm Dia x 280mm Push-on Fittings: • Inlet Pipes 2x10mm Inlet Pipes, • 1x10mm Top Outlet Pipe(Breather) • 1x1/2inch bottom outlet pipe This Alloy Fuel Swirl Pot is designed to meet the requirements of the serious motorsports enthusiast who is using a fuel injected car for competition or fast road use. Benefits of a Swirl Pot: • Reduces injection pump failure • Controls a supply of constant fuel • Will not starve the engine of fuel whilst hard cornering. These Swirl Pots are manufactured in our own factory based in UK to a very Hi-Standard.
Bulkhead Mount Fuel Swirl Pot Bent Top Tube Dimensions • 2 Litre: 100mm Dia x 280mm Push-on Fittings: • Inlet Pipes 2x10mm Inlet Pipes, • 1x10mm Top Outlet Pipe(Breather) • 1x1/2inch bottom outlet pipe This Alloy Fuel Swirl Pot is designed to meet the requirements of the serious motorsports enthusiast who is using a fuel injected car for competition or fast road use. Benefits of a Swirl Pot: • Reduces injection pump failure • Controls a supply of constant fuel • Will not starve the engine of fuel whilst hard cornering. These Swirl Pots are manufactured in our own factory based in UK to a very Hi-Standard.
Bulkhead Mount Fuel Swirl Pot Bent Top Tube Dimensions • 2 Litre: 100mm Dia x 280mm Push-on Fittings: • Inlet Pipes 2x10mm Inlet Pipes, • 1x10mm Top Outlet Pipe(Breather) • 1x1/2inch bottom outlet pipe This Alloy Fuel Swirl Pot is designed to meet the requirements of the serious motorsports enthusiast who is using a fuel injected car for competition or fast road use. Benefits of a Swirl Pot: • Reduces injection pump failure • Controls a supply of constant fuel • Will not starve the engine of fuel whilst hard cornering. These Swirl Pots are manufactured in our own factory based in UK to a very Hi-Standard.