Strut Spindle Support ASW Hammerhead Trailmaster 150cc 250cc 300cc Driver Side

Description

Strut and Spindle Support
This replacement front strut and spindle support goes to
driver side
Product Specs:
Strut used on many Chinese karts 150cc, 250cc, and 300cc
Fender bracket bolts to the strut with two bolts
Axle length is 3 1/2" and stem is 17" long. Caliper mounting bolts are 2-5/8" apart.
Note these struts work with the Carter 150cc kart but not the Carter 250cc.
Does work with the Hammerhead, Trailmaster, and American Sport Works 150cc 250cc 300cc go karts
The axle length on this strut is 3-1/2" some of the earlier models used a strut with a 4-1/2" axle
If you are replacing a 4-1/2" axle type, you will need to replace the hub as well.
Hammerhead Part Number: 2.000.005 or 2.000.028-150-2.000.027